Heads up: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your bow bouncing against the frame is the problem worth solving first. A rack that clamps tight to your handlebars or rear rack keeps the limbs off the trail and your hands on the bars, and the six picks below all do that in different ways — some with tool-free knobs, some with a twist-to-fit grip, some as a two-piece pair for hauling more than one item. Here is which one suits your bike and your bow.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Mounting hardware, bar diameter, and grip style decide whether a rack actually works on your ebike, so the picks below are sorted by how they clamp and how much they hold. Read on for the bow holder for ebike that fits your bars and your gear.
Top Picks
How To Choose The Best Bow Holder for Ebike
An ebike handlebar is not an ATV rack. The bars are thinner, the frame is lighter, and every bump travels straight up through the fork into whatever you have clamped on. That is why the first thing to check is not the grip — it is the clamp diameter and whether the mount was built to sit on a round tube at all.
Measure your bar before you buy anything
Clamps are sized to a range, and a mount built for a fat ATV rail will not cinch down on a slim ebike bar. The Kolpin Rhino Grip XL is rated for handlebars 5/8″–1″ in diameter, and the Offroading Gear pair fits round rails 7/8″–1-1/8″. The KEMIMOTO holder goes wider still, covering tubular bars from 0.9″ to 2″ and square bars from 0.6″ to 1.68″. Wrap a tape around your bar or check the spec sheet before you commit.
Round bars, square bars, and flat surfaces are three different mounts
Most ebikes use round tubing, so a round-rail clamp is the safe default. If your bike has a flat cargo plate or a square accessory bar, look for a holder that names that shape in its spec — the KEMIMOTO unit lists all three. The Pack Rack takes the opposite approach: steel U-bolts that clamp any tubular or square bar from ½” to 1″ in diameter, which covers most bike frames and handlebars.
Grip style decides how much your bow moves
A rubber-over-nylon grip squeezes the limbs and absorbs vibration. A twist-to-fit grip like the one on the ATV TEK V-Grip rotates 360° so you can dial the opening to your bow’s width, then locks it. Either works; the twist style is easier to swap between a bow and a shovel, while a fixed rubber cradle is simpler to load one-handed on a cold morning.
Side-by-Side Comparison
| Model | Best For | Mount Type | Weight | Hold Style | Amazon |
|---|---|---|---|---|---|
| ATV TEK FlexGrip Pro Single★ Best Overall | Adjustable single-item carry | Tubular and composite mount | 2 pounds | Two FlexGrip compartments | Amazon |
| ATV TEK V-Grip Handlebar MountTwist-To-Fit | Front or rear rack positions | Handlebar and rack mount | 1.56 pounds | 360° twist-to-fit grip | Amazon |
| Pack Rack Model PR1 | Handlebar and frame rails | Steel U-bolt, ½”–1″ bars | 1.27 pounds | 360° rotating rubber holder | Amazon |
| Kolpin Rhino Grip XL | Two-item rack or bar carry | Handlebar and rack mount | 1.6 pounds | Rubber over-molded grips | Amazon |
| KEMIMOTO Tool Holder | Wide bar and flat-surface fit | Round, square, or flat mount | 1.36 kg | Rubber-coated nylon grip | Amazon |
| Offroading Gear Clamp-On Pair | Two holders, quick install | Clamp-on round rail mount | — | Plastic cradle with rubber gasket | Amazon |
Detailed Reviews
1. ATV TEK FlexGrip Pro Single ATV Gun Rack
Our pick — 4.5+★ from 450+ verified ratings; the strongest balance of quality and price.
Sixteen inches of slide after mounting is what makes this the one to beat.
Most racks lock you into one position the moment you tighten the bolts. This one does not. After the tubular and composite mount is on, the FlexGrip body slides 16″ side to side, so you can fine-tune where the bow sits without re-drilling anything. That single figure is why it takes the top spot for ebike duty — you can push the grip clear of your knee and your brake line in one motion.
Shok Tek is ATV TEK’s vibration-isolating construction, which separates your gear from the jolts coming up through the bars. On a bike with a rigid fork, that difference matters — a bow that is not absorbing every pebble is a bow whose sight stays where you set it. The kit ships with two grips and all the hardware to secure one item, and the finger-adjustable knobs mean no tools for the fine-tuning.
Where it earns its keep is in the range of what it will hold. The FlexGrip compartments squeeze down on a slim bow limb and open out for a wide stock, and the same grip takes ice augers and soft cases. Buyers cite the adjustability as the reason they keep it and the stability on rough ground as the payoff. The honest catch is the one aspect that gets mixed feedback: durability. Treat the moving parts with a little respect, keep the knobs snug, and it holds up; wrench it hard and you shorten its life.
What earns the top spot
- 16″ of side-to-side travel after mounting, so you position it once and forget it
- Shok Tek build isolates bump vibration before it reaches your bow
- Knobs adjust by finger, with no tools needed on the trail
- Comes with two grips and full hardware for one item
Where it asks more of you
- At 2 pounds it is the heaviest rack on this list
- The moving parts reward gentle handling over brute tightening
Made for: the rider who wants to dial in placement once, precisely, and never touch it again.
Think twice if: you want the lightest possible addition to your bars — the Pack Rack below sheds real weight.
2. ATV TEK V-Grip Gun, Bow & Utility Rack
One grip that twists open for a bow and closes down for a shovel.
If you swap between gear more than you swap bikes, the V-Grip is built around that habit. The grip rotates a full 360°, so you twist it to match the width of whatever you are carrying and lock it down for the ride. Compound bow limbs, a rifle barrel, a fishing rod — the same cradle takes them all, and the compact footprint means it does not crowd the bars.
ATV TEK lists it for front and rear rack positions on most ATVs and ebikes, which is unusual in this group. Fit is what wins riders over here — more single out the fit than any other quality, with general functionality right behind. That pairing makes sense for a twist-style grip: it either clamps your bar or it does not, and once it does, the tool-free twist does the rest.
The build is lighter than the FlexGrip at 1.56 pounds, and at 12.6 x 1.97 x 12.2 inches it occupies a similar footprint. What you give up is the FlexGrip’s sliding adjustment — this one positions by rotating the grip and choosing your clamp spot, not by sliding the whole body. The one area that draws mixed notes is long-term durability, so keep the twist mechanism clean and it will serve you well.
The swap-friendly choice: a single twist-fit cradle that changes size for a bow, a rifle, or a rod without extra hardware.
Worth knowing: you get rotational adjustment rather than the FlexGrip’s sliding travel, so plan your clamp position before you drill.
Reach for it if: your bow shares bar space with other gear through the season.
Look elsewhere if: you want the mount-and-slide flexibility of the FlexGrip above.
3. Pack Rack – Gun & Bow Rack for ATVs and Bikes – Model PR1
The lightest rack here, and it clamps nearly any bar on your bike.
At 1.27 pounds, the PR1 is the featherweight of this group — noticeably lighter than the 2-pound FlexGrip Pro, and it shows in how little it disturbs the steering feel on a light ebike. The clamp is the clever part: steel U-bolts close around any tubular or square bar from ½” to 1″ in diameter. That range covers most handlebars, seat posts, and frame rails, so you are not hunting for an exact diameter match.
The holder itself is a true 360-degree rotating cradle. Twist it to the size of your bow, lock the wing nut, and it stays. Under the thick soft rubber sits an internal steel core, and the mounting blocks are aircraft-grade aluminum — the construction is why it outlasts the all-plastic clamps. Riders praise its build quality most and its durability second, which tracks with a steel-and-rubber assembly rather than a molded shell.
Sold since 1984 as the original handlebar gun and bow rack, it has kept the same basic design. Heavy-duty UV-resistant rubber straps loop over the holders so you will not lose them, and the unit can carry rifles, shotguns, bows, fishing rods, and shovels. The trade-off is that it is a single holder — if you want two grips side by side, you either buy two or step up to the Kolpin pair below.
Why it punches above its price
- 1.27 pounds — the lightest rack in this lineup
- U-bolt clamp fits round or square bars from ½” to 1″
- Internal steel cores and aircraft-grade aluminum blocks instead of plastic
- UV-resistant rubber straps keep the holders attached
Limits to plan around
- One holder per unit — no pair in the box
- The U-bolt fits a set diameter band, so measure before ordering
Best for: a slim handlebar and a rider who counts grams on a light ebike.
Not ideal if: you need two holders mounted at once from a single box.
4. Kolpin Rhino Grip XL – Rack/Handlebar Mount – 21530, Black
Two grips in the box, each rated to carry up to 15 lbs.
Bring two things. That is the pitch here, and it is the reason to pick the Rhino Grip XL over every single-holder rack above. You get a matched pair with rubber straps and hardware, each grip carrying up to 15 lbs of bow, crossbow, shovel, or fishing rod. Two holders also spread the load, so a bow rides across both points instead of hanging off one.
The adjustability is the feature riders notice. The grip tilts 160° in 40° increments, and the base rotates a full 360°, which means you can angle the cradle to your bars rather than forcing your bars to suit the cradle. The Kwik-Clip design lets you pop a grip off its base without tools when you want to store gear off the bike. Mounting is direct to a tubular rack or to handlebars from 5/8″ to 1″ in diameter.
Two cautions come straight from the maker and they are worth repeating. Guns and heavy objects should not be carried in the full-tilt position, so keep a loaded bow near vertical. And Kolpin does not certify fitment for every vehicle, so check your own bike’s manual and bar diameter first. Set it up within those limits and this pair is a strong value for hauling two items at once.
What you are buying: a matched two-grip set with tilt and swivel, so heavier gear rides across two points instead of one.
The fine print: do not carry heavy objects fully tilted, and confirm your bar diameter lands in the 5/8″–1″ range.
Pick this when: you want two holders and a cradle that tilts to suit an awkward bar angle.
Skip the tilt temptation: keep heavy gear upright — the maker says so, and a bow deserves it.
5. KEMIMOTO Tool Holder for ATV
Three mounting shapes in one box, for the ebike that refuses to be standard.
Ebikes are a mess of odd tube sizes, and KEMIMOTO built this holder to cover the spread. It clamps a tubular bar from 0.9″ to 2″ in diameter, a square bar from 0.6″ to 1.68″, or bolts to a drillable flat surface up to 1.5″ thick. If your bars are non-standard or you have a cargo plate you would rather use, this is the holder that gives you options the others do not.
The grip is a nylon core wrapped in thick rubber — a coating that absorbs impacts so your bow does not take every bump directly. The holder tilts to a 45-degree position and is rated to hold up to 20 kg, and the manufacturer’s 44-pound load capacity figure reflects that same upper limit. Internal locking fins with rubber snubbers grab the gear so it stays put on rough ground, and the extended height lifts your bow clear of the machine’s edge.
Riders value its build quality most and its stability close behind — a sensible read for a rubber-over-nylon grip. The trade-offs are durability and fit, both of which get mixed feedback. That usually means the hardware needs to be torqued properly on install and your bar needs to fall inside the stated ranges. Check both, and the wide-fit flexibility is worth having. Do not carry heavy gear in the fully tilted position.
Where it shines
- Fits round bars 0.9″–2″, square bars 0.6″–1.68″, and flat surfaces up to 1.5″ thick
- Thick rubber coating over a nylon core soaks up trail vibration
- Extended height keeps the bow clear of the machine’s edge
- Internal locking fins and rubber snubbers hold gear on bumpy ground
What to watch
- Durability and fit both draw mixed notes — measure carefully
- Heavy gear should stay out of the full 45-degree tilt
Go for it if: your ebike’s bars are an odd size or you want a flat-surface option.
Double-check first: your bar diameter falls inside the stated ranges before you order.
6. Set of 2 ATV Clamp-on Gun Mount Holders
Two clamp-on holders, no tools needed, for the simplest possible setup.
The appeal is speed. These arrive pre-assembled and clamp straight onto round rails from 7/8″ to 1-1/8″ in diameter, which covers most standard four-wheeler and ebike bars. No drilling, no U-bolt fiddling — you open the clamp, seat it on the rail, and tighten. A rubber gasket sits inside to cut down on water getting in and to keep the clamp from shifting once seated.
You get two holders in the box, so a bow and a shovel can ride together. The body is high-quality plastic designed to handle outdoor weather, and the strong grip holds gear securely when it is fresh. For a light bow on a fair-weather bike, the pair works, and the price tier is the most budget-friendly on this list.
Now the honest part. Durability draws the heaviest criticism here, with some clamps giving out within a month of regular use. Fit splits opinion too — spot-on for some 4-wheelers, wrong on certain Yamaha models. Treat this as the holder for a light bow and occasional rides, not the one you bolt on for a decade of hard trail use. For a first rack on a bike you ride around home, it does the job without asking much of you.
The fast-setup pick: pre-assembled clamps that go on a round bar with no tools and hold a light bow well.
Size the expectation: the plastic build suits light gear and casual rides — heavier loads and hard daily use are a different job.
Reach for this if: you want two clamps on a round bar fast and cheap for a light bow.
Think twice if: your bars or your load are heavy — a metal-core rack like the Pack Rack lasts longer there.
Know the Specs
Bar diameter and clamp style
The tube your holder clamps to has to fall inside the mount’s stated range, or it will not grip. A round-rail clamp like the Offroading Gear pair fits 7/8″–1-1/8″; U-bolts like the Pack Rack’s cover ½”–1″; the KEMIMOTO covers round bars up to 2″. Measure your handlebar and your rear rack rail before you buy — a clamp that is too big will spin, and one that is too small will not close.
Load rating and tilt limits
The load figure tells you how much weight a grip is built to take — the Kolpin pair rates each grip to 15 lbs, and the KEMIMOTO lists a 44-pound capacity. Tilt is the other half: a holder that tilts lets you angle the cradle to your bars, but heavy gear should stay upright. Both Kolpin and KEMIMOTO warn against carrying heavy objects in the fully tilted position, because the weight hangs off the grip instead of resting in it.
Grip material and vibration
A rubber-over-nylon or rubber-over-steel grip squeezes the bow and absorbs vibration from the trail. The Pack Rack uses internal steel cores under thick rubber; the KEMIMOTO wraps a nylon core in thick rubber; the FlexGrip relies on Shok Tek isolation. On an ebike with a rigid fork, that cushioning keeps the sight from walking and the finish from scuffing.
Mounting position on an ebike
Front or rear rack — pick the one that keeps the bow clear of your knees and the wheel. ATV TEK lists its V-Grip for front and rear positions on most ATVs and ebikes; Kolpin mounts to a tubular rack or to handlebars directly. Whatever you choose, check that the bow’s limbs clear the brake lines and that nothing swings into the wheel at full lock.
Common Questions
Will a gun rack built for an ATV also fit on an ebike handlebar?
What bar diameter does the Pack Rack accept?
Can I carry a compound bow in a rubber grip holder?
Should the bow ride upright or tilted on the holder?
How much weight can each holder carry?
Do I need tools to install these holders?
Will the holder stop my bow rattling on rough ground?
Is one holder enough or should I buy a pair?
Can I leave the holder on my ebike all season?
Will the clamp scratch my handlebar?
The Bottom Line
The bow holder for ebike that earns the top spot is the ATV TEK FlexGrip Pro Single, because its 16″ of side-to-side adjustment lets you position the grip once and keep your bow clear of knees, cables, and wheel. If your bars are an odd size or you want a flat-surface option, the KEMIMOTO Tool Holder covers the widest range of mounts in this group. And for the lightest possible addition to a slim handlebar, reach for the Pack Rack PR1 at 1.27 pounds. Whichever you pick, check your bar diameter against the clamp’s stated range before you buy — that one measurement decides whether any of these racks actually fits.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, My Heart Lives Here earns from qualifying purchases. This does not affect which products we feature.