Heads up: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Moving a trailer with a tractor should not end with you wrestling a tongue by hand or tugging a loaded wagon across gravel. A 3 point hitch trailer mover bolts a 2″ receiver and ball mount to your Category 1 linkage, so you back up, pin on, and pull. This guide sorts the real options into what each one actually gets done around a yard, a farm, or a job site.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You will see the pull ratings, the receiver sizes, and the fit quirks that decide whether an attachment works on your Category 1 tractor — all in plain terms. Here is the honest read on the best 3 Point Hitch Trailer Mover for your machine and your towing jobs.
Top Picks
How To Choose The Best 3 Point Hitch Trailer Mover
The whole job of this attachment is to put a tow point on your tractor’s three-point linkage — the two lower arms and one top link at the rear. Match the pin spacing and pull rating to your tractor and it just works. Get either wrong and the frame will not mount or will not safely tow.
Start with your tractor’s category and pin size
Every pick here is built for Category 1 tractors, the common size for compact and subcompact machines. The pin diameter is the number that trips people up. A 7/8″ lift pin is what many of these adapters use, so check yours before you order.
Also measure the width between your lower link arms. One of these hitches states a 25.94″ width and another lists 32.3″ pin to pin, and those are different footprints. Measure your lower-link spread before ordering to avoid a return.
Match the pull rating to your real loads
Towing capacity tells you how much trailer and load the frame is rated to drag. The spread in this lineup runs from 2500 pounds up to 10000 pounds. If you only move an empty utility trailer, a lighter-rated unit is plenty. If you pull loaded wagons or logs, aim higher.
Remember your tractor’s own lift and traction set the practical ceiling. A 10000 lb hitch on a tractor that can only pull 3000 lb adds margin, not pulling power.
Decide on receiver style before anything else
A standard 2″ receiver takes a slide-in ball mount, so you can swap ball sizes as your trailers change. A gooseneck ball mount — often a 2 5/16″ ball — suits gooseneck trailers directly. Some frames give you both, which is why they cost more.
Think about how often you swap implements
If your tractor already has a quick hitch, look for an attachment that says it is quick-hitch compatible. A few units in this list carry a fit caveat with certain quick hitch systems, so read that line closely. Without a quick hitch, a plain Cat 1 pin mount saves money and skips adapter fit issues.
Side-by-Side Comparison
| Model | Best For | Rated Pull / Towing | Receiver Setup | Unit Weight | Amazon |
|---|---|---|---|---|---|
| Titan Attachments 3 Point Gooseneck (Green)★ Best Overall | Trailer and hay work with one tool | 2500 lb | 2″ receiver + gooseneck ball | 59 lb | Amazon |
| YINTATECH Heavy Duty 3 Point Trailer HitchBudget Champion | Budget-minded general towing | 3000 lb | 2″ receiver + ball drawbar | 42.4 lb | Amazon |
| Sulythw 3 Point 2″ Trailer Hitch ReceiverHeavy Steel Pick | Heavy steel on a budget | 3000 lb | 2″ receiver + ball drawbar | 18 kg | Amazon |
| SUNSHINE FARMRE All-in-One 3 Point Receiver | Tri-ball swapping and hook towing | 10000 lb | 2″ receiver + tri-ball + hook | 32 lb | Amazon |
| YINTATECH 3000lbs Quick Hitch Category 1 | Quick-hitch tractors needing a receiver | 3000 lb | 2″ receiver | — | Amazon |
| SUNSHINE FARMRE Dual 2″ Receiver Hitch | Gooseneck trailers and logs | 10000 lb | Dual 2″ receivers + tri-ball + hook | 34.7 lb | Amazon |
| CAMMOO 3-Point Quick Hitch | Frequent implement swaps | 3000 lb | 2″ receiver | 66.9 lb | Amazon |
| YITAMOTOR 3 Point Quick Hitch | Non-standard implements via adapter | 3000 lb | 2″ receiver | 63.2 lb | Amazon |
| Titan Attachments 3 Point Gooseneck (Charcoal) | Gooseneck plus hay spear mount | 2500 lb | 2″ receiver + 2 5/16″ gooseneck ball | 58 lb | Amazon |
Detailed Reviews
1. Titan Attachments Gooseneck Tractor Trailer Hitch Green
Our pick — 4.5+★ from 400+ verified ratings; the strongest balance of quality and price.
One frame that hauls a trailer and mounts a hay spear, built from 1/4″-thick steel.
Two jobs live in this one attachment. The lower mount takes standard 2″ receiver hitches, and the upper mount carries a gooseneck ball for gooseneck-style trailers. That means a 2″ receiver for a utility trailer and a gooseneck ball on the same frame, no swapping mounts.
The frame is built from 3″ x 3″ tubular steel that is 1/4″ thick and powder-coated to resist rust and corrosion. At 59 pounds it is a substantial piece of iron, and that weight is why it feels planted rather than tinny when you take up a load. Its rated maximum towing capacity is 2500 pounds.
Where it earns its keep is versatility. It fits Category 1 three-point systems on most tractors, including Kubota, New Holland, and Ford, and needs no rear hydraulics or PTO. A welded Conus 2 hay spear sleeve lets you add bale handling later. What wins people over most is the steel itself — durability and build quality are the two things this hitch gets praised for above all else. The catch worth knowing: pins have a habit of going missing from the box on some shipments, so check the hardware the moment it lands and call it in fast if anything is short.
What This Frame Does Well
- Runs a 2″ receiver and a gooseneck ball on one mount
- 3″ x 3″ tubular steel at 1/4″ thickness, powder-coated
- Hay spear sleeve welded in for bale work later
- Fits Category 1 tractors without rear hydraulics or a PTO
Where It Asks For Patience
- 2500 lb rating trails the 10000 lb picks here
- 59 lb is the heaviest-to-lift frame in this lineup of its type
- Hardware has arrived incomplete on some orders
The smart buy if: your work mixes trailers with hay bales and you want a single attachment that handles both without a second purchase.
Keep in mind: the 2500 lb rating sets a lower ceiling than the big-capacity hitches below, so match it to your real trailer weights.
2. YINTATECH 3 Point Trailer Hitch Cat 1
The stripped-down towing plate for a subcompact tractor that mostly pulls a small trailer.
This is a plain double-duty plate: a standard 2″ receiver and a trailer ball drawbar, so you can bolt a ball on or slide in a mount as your trailers change. At 42.4 pounds it lands between the heaviest and lightest frames in this list, which keeps it manageable to hang on the linkage alone.
Steel thickness is the headline. The frame is 0.3″ thick heavy-duty steel, gloss red powder-coated to fight corrosion and fading. The bright finish is not just cosmetic — the maker points to the red catching the eye as a safety plus when you are working around the tractor.
The box includes 1 top pin, 2 bottom pins, and a top gooseneck ball, and the listed footprint is 25.94″ W x 19.29″ H. Measure your machine before ordering; that width is narrower than some of the 32.3″ pin-to-pin units here, so a wide lower-link spread is worth checking. If you also want to handle hay later, the frame is set up to accept hay spears and stabilizer spears.
Best suited to: a compact tractor owner who wants one rugged plate and a 2″ receiver without paying for gooseneck hardware they will never use.
Measure first: confirm your lower-link width against the 25.94″ figure, since this is one of the narrower frames in the lineup.
Right call when: the trailer you move is a routine utility or flatbed and simple is what you want.
Look past it if: you need a gooseneck ball up top — that hardware is not part of this frame.
3. Sulythw 3 Point Trailer Hitch Receiver Category 1
A 3000-pound pull rating wrapped in 0.3″-thick steel, aimed at hard working tractors.
Compare this to the Titan above and the priority flips. The Titan wins on gooseneck hardware, while this Sulythw frame wins on raw pull: 3000 pounds versus the Titan’s 2500. If you pull loaded bumper-pull trailers, the 3000 lb rating over the Titan’s 2500 lb is the reason to pick this one.
The build mirrors the workhorse formula — 0.3″ thick heavy-duty steel, gloss red powder coat against corrosion and fading, and a bright finish that the maker says makes the hitch easier to spot during traction work. It pairs a standard 2″ receiver with a ball drawbar so several trailer types fit.
Fit guidance is specific here: 32.3″ W x 19.48″ H pin to pin, with 1 top pin, 2 bottom pins, and a top gooseneck ball in the box. That wider pin-to-pin figure matters if your linkage spread runs wide. The same frame accepts hay spears and stabilizer spears when you want to branch into bale work.
The honest read: it delivers the heavier 3000 lb rating and wide pin spacing at a modest weight, and that combination suits a tractor that pulls real loads rather than an empty cart.
One caution: measure your pin-to-pin width to the 32.3″ spec before you commit — this frame runs wider than the compact 25.94″ plate above it.
Made for: tractors with a wide lower-link spread pulling loaded trailers.
Maybe not: if your linkage is narrow, the wider footprint could be a poor match — check the numbers first.
4. SUNSHINE FARMRE All-in-One 3 Point Trailer Hitch Receiver
Three trailer balls and a towing hook on one frame, rated to a 10000-pound ceiling.
Capacity is where this hitch separates itself. Its maximum towing capacity is 10000 pounds against the Titan’s 2500 — a genuine four-fold jump in rated pull. Add a towing hook rated at 10000 pounds and you can drag logs or clear debris with a chain, not just trailers.
The receiver kit brings a 1-7/8″, a 2″, and a 2-5/16″ trailer ball plus that hook, so you can match almost any trailer coupler without hunting for parts. The body is 3mm thick black powder-coated stainless steel, aimed at rust and corrosion resistance for outdoor work. A 32-pound weight keeps it easy enough to lift onto the linkage.
It uses 7/8″ diameter Category 1 lift pins and is quick-hitch compatible for Category 1 systems, with one exception: iMatch is called out as not supported. Fit is the mixed note — some buyers report it seats perfectly while others find it fights their quick hitch. Value is the part that draws the most praise, and the three-year warranty backs the buy.
Reasons This One Stands Out
- 10000 lb rated towing capacity, the top of this list
- Tri-ball kit covers 1-7/8″, 2″, and 2-5/16″ couplers
- 10000 lb towing hook for chain work
- 7/8″ lift pins and quick-hitch compatibility
- Three-year warranty
Things To Weigh Up
- iMatch quick hitch is explicitly not supported
- Quick hitch fit divides owners — some seat cleanly, some do not
Reach for this if: you pull a range of trailer sizes and want one box that covers every coupler plus a chain hook.
Check before you buy: if your tractor runs an iMatch quick hitch, this frame is not built for it.
5. YINTATECH 3000lbs Heavy-Duty 3 Point Quick Hitch Category 1
A quick hitch with a built-in 2″ receiver and a top hook you can raise or lower five ways.
If your tractor already runs a quick hitch setup, this drops straight on. The top hook has 5 adjustable positions across the holes, so you can line it up to an implement without drilling, bolting, or welding. The body is heavy-duty Q235 steel, powder-coated for rust and corrosion resistance.
The rated capacity is 3000 pounds, and the maker points to a 20% thicker quick-attach body as the reason it holds up. There is a 2″ hitch receiver built into the frame for trailer balls and other attachments, so the same piece that grabs implements can also pull a trailer.
Quality and sturdiness are what people rate hardest here — it feels like a solid piece of equipment that installs easily. The fit note is the honest caveat: it works with a Speeco Category 1 quick hitch but will not line up with every quick hitch system, so verify yours. It ships with a 3-point connection body, 1 top pin, and 2 bottom pins.
Where it shines: repeat implement changes on a quick-hitch tractor, with a 2″ receiver on board for trailer duty in between.
The fit caveat: compatibility varies by quick hitch brand, so match it to your specific system rather than assuming a universal fit.
Your pick if: you want one attachment that swaps implements and pulls a trailer from the same 2″ receiver.
Think twice if: your quick hitch is an off-brand system — confirm it matches before ordering.
6. SUNSHINE FARMRE 3 Point Trailer Hitch, Dual 2″ Receiver
Two receivers, top and bottom, for gooseneck trailers and logs that need extra support.
Most hitches here give you one receiver. This one stacks two — an upper and a lower 2″ receiver — so gooseneck trailers, logs, and standard implements all have a mounting point with more stability behind them. Its rated pull force is 10000 pounds, matching the SUNSHINE all-in-one above at the top of this list.
The kit carries a tri-ball set and a hook, aimed at compact and large tractors alike for industrial, construction, and agricultural towing. The frame is thick green powder-coated steel, built to stand up to rust and tough outdoor conditions, and it weighs 34.7 pounds.
Setup uses a standard 7/8″ lift pin plus a bottom-pin design the maker says eases attachment on both subcompact and larger tractors. It is built for Category 1 three-point and quick hitch systems. The three-year warranty and dual-receiver layout are the reasons to pick it over a single-receiver plate.
The case for it: dual receivers give you a second, higher tow point that single-receiver frames simply cannot offer — handy for gooseneck and log work.
The trade-off: more receiver hardware means a busier frame to hang and align, so measure your linkage and quick hitch before you mount it.
Worth it for: owners who need a second tow point up high for gooseneck or log towing.
Overkill if: a single lower receiver already covers every trailer you own.
7. CAMMOO 3-Point Quick Hitch with 2″ Receiver
A 66.9-pound quick hitch that skips bushings so implement swaps go faster.
The no-bushing design is the whole point here. With no extra bushings to fit, implements connect directly, which the maker says speeds up the changeover. A 5-level adjustable bolt runs through 7 holes for 5 quick-height positions, so you can match an implement to the task. A pre-installed adapter comes in the packaging and detaches for standalone use, and an extra top adapter gives you two height options for link adjustment.
Lifting and towing capacity is rated at 3000 pounds, and the reinforced 2″ receiver is built to take a trailer ball or other equipment directly. The frame is alloy steel at 66.9 pounds, the heaviest here, so plan on a steady hand or a helper when you mount it.
The install side is where this hitch earns its keep — many owners mention getting it on in about 20 minutes, and quick implement changes are the frequent theme. Quality and functionality are the two things it gets praised for most. Fit is the honest caveat: this unit has drawn more fit complaints than its build, so confirm it matches your Category 1 setup rather than assuming.
Why People Like It
- No-bushing design makes implement changes quicker
- 5-level adjustable top bolt across 7 holes
- Detachable adapter for standalone use
- Reinforced 2″ receiver for trailer balls
- 3000 lb lifting and towing capacity
Points To Consider
- 66.9 lb frame takes some muscle to mount
- Fit has drawn complaints on some setups
Best for: a busy property where you swap implements often and want the changeover to be quick.
Not for: anyone unsure of their hitch dimensions — verify the fit before you order this heavier frame.
8. YITAMOTOR 3 Point Quick Hitch Orange
Built for the odd implements that do not match standard quick hitch spacing.
The versatile adapter is what sets this apart. It lets the hitch reach attachments that do not meet ASABE quick hitch standards — snowplows, mowers, and medium-to-large equipment that would otherwise need a whole different setup. Its 5-position adjustable hook uses 7 holes for quick-height settings and bolts on without welding or modifying your tractor.
Capacity is 3000 pounds of lifting and towing, with the top-hook side plates reinforced to 0.16″ thickness. Pin hooks carry a limit function on both sides for added stability. A 2″ receiver is built in for a trailer ball or other attachment. At 63.2 pounds it is one of the heavier frames here.
Functionality and build quality are the strong suits — customers note professional welding and solid construction for light-duty tractors. The honest caveat is fit: it is reported as not wide enough for some standard quick hitches, and rough use can strain the welds. That makes it a match for non-standard implements, not a slam-dunk universal adapter.
The draw: the adapter opens up implements that standard quick hitches reject, which is worth a lot if your shed is full of non-standard gear.
The caveat: fit runs narrow for some standard quick hitches, and this unit prefers light-duty work — size it to the job.
Pick it if: your attachments do not follow standard quick hitch spacing and you need an adapter to bridge them.
Pass if: you run standard implements and heavy loads — the standard-spacing picks above suit that better.
9. Titan Attachments Gooseneck Tractor Trailer Hitch Charcoal
The same Titan gooseneck frame in charcoal, with a 2 5/16″ ball up top.
This is the green Titan’s twin, wearing a charcoal powder coat instead. The dual layout is identical: a lower mount for a 2″ receiver hitch and an upper mount carrying a 2 5/16″ gooseneck ball for gooseneck-style trailers. Both are rated to a 2500-pound maximum towing capacity.
Build matches the sibling frame — 3″ x 3″ tubular steel at 1/4″ thickness, powder-coated against rust and corrosion, with a Conus 2 hay spear sleeve welded in for bale work. It fits Category 1 tractors from Kubota to New Holland and Ford without rear hydraulics or PTO. The one physical difference is weight: this unit is listed at 58 pounds, a pound lighter than the green version.
As with its twin, durability and build quality are the traits owners single out most, and it is easy to attach and move trailers with. The same supply snag applies — pins sometimes go missing from the box, so verify the hardware on arrival. Charcoal is simply a finish choice; if you already like the green model’s specs, this is that hitch in a different color.
What you get: the proven Titan dual receiver and gooseneck layout with the steel and hay sleeve that make it durable.
Worth noting: it is a finish variant of the top pick at a slightly higher tier, so choose it for the charcoal look or the 2 5/16″ ball, not for extra capability.
Choose this for: a gooseneck trailer setup where the 2 5/16″ ball and charcoal finish are what you want.
Same watch-out: the 2500 lb rating and the occasional missing pin travel with this model too.
Know the Specs
Towing Capacity vs. Pull Force
You will see two similar numbers on these hitches, and they measure different things. Towing capacity is the rated load the frame is built to drag — the figure that ranges from 2500 to 10000 pounds across this lineup. Pull force is the rated pulling strength in a straight line, often quoted separately. Match whichever number applies to your heaviest trailer, then remember your tractor’s own lift and grip still set the real ceiling.
Receiver Size and Gooseneck Ball
A 2″ receiver is the standard square socket that accepts a slide-in ball mount, so you can change ball sizes as trailers change. A gooseneck ball mount is a fixed ball — often 2 5/16″ — that hooks up a gooseneck trailer directly. Hitches that offer both give you flexibility; single-receiver frames are simpler and lighter. Decide which trailers you actually own before choosing between them.
Steel Thickness and Finish
Build numbers tell you how much iron you are getting. A 0.3″ plate or 3″ x 3″ tubular steel at 1/4″ thickness points to a stout frame. Powder coating is the standard finish here — it seals the steel against rust and corrosion on outdoor work. Heavier steel generally means a more planted feel and more weight to hang, so match thickness to how hard you plan to work the hitch.
Quick Hitch Compatibility
A quick hitch is a frame that grabs implements so you do not manually pin each one. An attachment marked quick-hitch compatible will bolt onto that system. But compatibility varies by brand — some frames seat cleanly with one quick hitch and fight another. If you run a quick hitch, confirm the specific system your hitch names as supported before you order.
Common Questions
Will a 3 point hitch trailer mover fit my subcompact tractor?
What is the difference between a 2″ receiver and a gooseneck ball on these hitches?
How much towing capacity do I need for moving trailers with a tractor?
Do these 3 point hitches require rear hydraulics or a PTO?
Why does quick hitch compatibility vary so much between these models?
Can I use a 3 point trailer mover for hay bales as well as trailers?
How long does it take to install one of these on a tractor?
What does the steel thickness number tell me about durability?
Are these hitches compatible with a Category 1 quick hitch already on my tractor?
Does the color or finish of the hitch matter beyond looks?
The Bottom Line
The strongest all-rounder is the Titan Attachments 3 Point Gooseneck Hitch in green — a dual 2″ receiver and gooseneck ball frame in 1/4″-thick steel, ready for both trailer and hay work. If a high pull rating is your priority, the SUNSHINE FARMRE all-in-one brings 10000 pounds of rated capacity plus a tri-ball set. And if you swap implements constantly, the CAMMOO quick hitch with its no-bushing design is the one to reach for.
The one nudge worth giving: if you are unsure of your tractor’s measurements, write them down before you click buy. Pin diameter, lower-link width, and quick hitch brand decide the fit across every pick here, and a minute with a tape measure beats a return shipment every time.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, My Heart Lives Here earns from qualifying purchases. This does not affect which products we feature.